| Wheels Dept. | Italiano Italiano | Français Français | Español Español | Deutsch Deutsch | Portugues Português | Español Pусский |


Welding & cutting / Home

Il contenuto di questa pagina richiede una nuova versione di Adobe Flash Player.

Scarica Adobe Flash Player

The MIG flagships: the new EVO Speed Star line

The MIG welding power sources you were waiting for. The new EVO Speed Star line consists of three inverter three-phase multi-function power sources marked out by:

- HIGH DUTY CYCLE AT 40°C (IEC 60974-1)

The 380A power source, with optional water cooling unit, is available either in compact version or with separate wire feeder.
The 500A power source has built-in water cooling unit and separate wire feeder.


Growing success of the MetalMadrid show

The MetalMadrid 2015 show, which has been held in Madrid on November 4th and 5th, 2015, was very successful and showed a strong growing trend for the number of both the exhibitors and the visitors.

The show involves different sectors and the Cebora stand was mainly focused on the sectors of the industrial welding and of the welding and plasma cutting automation. The remarkable number of visitors to the stand as well as the several contacts in the two exhibition days have demonstrated that the Cebora professional range is today among the most complete and technologically advanced ones.



The Cebora power sources at CESVIMAP

CESVIMAP of Avila (Spain), the Center for Experimentation and Road Safety MAPFRE, which focuses its research on the method of repairing damage to vehicles due to accidents, has issued the following piece of news:

"Claudio Minghetti, Cebora S.p.A. (Italy) and Paulì Cots, distributor of CEBORA through the company Soldequip, presented the new power sources to CESVIMAP. CEBORA designs and manufactures welding machines for vehicle body repair.



Cebora with Cebotec Oy at Alihankinta and Jointec 2015

At a distance of just a little more than two weeks one from the other, have took place in Finland two important exhibitions for the welding and cutting sector: the Alihankinta fair in Tampere (September 15th through 17th, 2015) and the Jointec fair in Helsinki (October 6th through 8th, 2015).

In both fairs, the Finnish distributor of Cebora, company Cebotac Oy, was present with its stand in which were exposed the Cebora plasma cutting power sources, already very popular in Finland, as well as the new inverter synergic MIG-MAG welding power source Synstar 270T, a three phase power source of 270A at 20% and 250A at 40%, with the possibility of adding the optional pulsed arc function.



HST and Cebora cooperating with success on the eastern markets

The company HST, the historical distributor of Cebora in the Czech Republic, is a dynamic company constantly developing new ideas for the industrial welding and cutting market.

A great interest in the HST CREATIVE portfolio of products for welding automation has come from the East European markets. In the last half of 2015 HST CREATIVE made a great number of successful installations of big devices for welding automation equipped with Cebora welding technologies. The result of this synergy is evident in the customer satisfaction, thanks to the high level of quality, reliability, state of the art technology and technical support to the end user.



The Cebora Automotive line approved also by Rotunda

The US company Rotunda issues approvals, that are valid for the service network for the Ford and Lincoln vehicles, reserved to excellence products only.

Following the approvals that Cebora has already obtained directly from Ford, also Rotunda has approved the following five Cebora power sources of the Automotive line:

  • Power Plasma 3035/M, art. 279
  • Sound MIG 2060/MD Star Double Pulse, art. 301
  • Jaguar Sound MIG 2060/MD Star Double Pulse, art. 302
  • Synstar 200 M, art. 322
  • Power Spot 5700, art. 2156



The Cebora automotive line at the Automechanika in Johannesburg

The Southern African leg of the international trade event, Automechanika 2015, took place on the 6th to 9th of May at the JHB Nasrec show grounds, on an area of more than 20,000 sqm and the participation of almost 15,000 visitors and 700 exhibitors.

Automechanika Johannesburg puts the sub-Saharan professional automotive aftermarket on the centre stage in one venue at one time and offers an unrivalled platform to meet your sales and marketing objectives.

The Automechanika Academy plays a crucial role by providing a platform for transferring new technological and business competencies and keeping automotive aftermarket specialists up to date.



Ford approves also the Synstar 200M and the new Power Spot 5700

Ford USA, who already approved so far several Cebora power sources of the Automotive line, has now renewed the worldwide approval, originally released in the year 2013, for 5 models of the plasma cutting, MIG-MAG welding and spotter lines.

While the new approval reconfirms the models Power Plasma 3035/M, art. 279, Sound MIG 2060/MD Star Double Pulse, art. 301, and Jaguar Sound MIG 2060/MD Star Double Pulse, art. 302, it does not refer any more to the models EVO 200 M Synergic Combi, art. 622, and Power Spot 5600, art. 2154, recently discontinued, and includes now the new models Synstar 200 M, art. 322, and Power Spot 5700 Aluminium, art. 2156.



The Cebora group acquires GEFRA, system integrator

The Cebora group has acquired the company GEFRA AUTOMAZIONE srl, a young and dynamic company, yet already rich of experience in the automation field, in which it offers turn key systems for various requirements.

This important acquisition comes within the frame of the general strategy of Cebora, that for some years has been investing big resources in the sector of automation and robotics and obtained a positive feedback from the markets, as far as both the automated welding and the automated plasma cutting, either on pantograph or on robot.


2014: Cebora's 60th anniversary

60 years have already passed since 1954, when Emiliano Generali, whose memory remains indelible in all those who knew him, founded Cebora.

Sixty years of research, of innovation, of growth, of commitment, of professionalism and of 100% Italian quality.

And today the satisfaction of celebrating this important anniversary together with our sales network and our customers, hoping to continue our cooperation for many, many years to come.


>>> Read all pieces of news

Cebora on Facebook Our Facebook page:

Cebora Youtube channel Our Youtube channel

Cebora Google plus profile Our Google+ profile

Cebora Linkedin profile Our Linkedin profile



Weld-Tech distributor of the Cebora industrial line in Poland

Cebora, already present for years in Poland with both the plasma cutting automation line and the collision repair line, has reached an agreement with the company Weld-Tech of Legnica, with branch offices in Gdansk, Ustron and Walbrzych, for the distribution of the Cebora industrial line in Poland.

Weld-Tech specializes in welding and not only has many years of experience in the field, but also a technical-commercial staff able to support the end user with demonstrations on site by means of demo vans, until the after-sales service.



SEMA in Las Vegas: mission to aluminum

The SEMA fair, that was held in Las Vegas on November 3rd through 6th, 2015, is the most important event in the USA as far as the vehicle repair and transformation sector is concerned and this edition has reached the number of 60,00 visitors.

The main theme of SEMA 2015 was for sure the confirmed epochal turning-point introduced in the car sector by the constantly growing use, in the car manufacture, of new materials such as high resistance steels and, above all, aluminum and its different alloys, basic components, also, of the new Ford pick-up F-150 which, launched in 2014, is now the most popular model in the USA.



Cebora novelties at the Equip'Auto fair in Paris

The EQUIP AUTO fair, the most important exhibition in the French automotive sector, took place in Paris on October 13th through 17th, 2015, attracting approximately 100,000 professionals.

In the stand of the French distributor of Cebora, company Workshop Equipment Systems (WES) were exposed some Cebora power sources of the automotive line, including the new Power Spot 5700 Aluminium, a capacitive discharge power source capable to weld up to M8 studs of all kinds of metal.



The Cebora cutting automation at the Teknologia'15 in Helsinki

The Teknologia'15 fair, that was held in Helsinki on October 6th through 8th, 2015, is an important event for the Finnish technical and industrial world. The fair consists in fact of 7 contemporaneous events: Automation, Elkom, Hydraulics&Pneumatics, MecaTec, FinnTec, ToolTec and JoinTec.
In three days, the Helsinki fair attracted 14,000 visitors, professionals of the industries, students and experts with the help of nearly 400 exhibiting companies, different types of shows, lectures by acknowledged experts and other programmes.

In this encouraging frame, the company Isojoen Laitevalmiste Oy, partner of Cebora for the cutting automation market, exposed in its stand a Cebora power source of the HQC line (Plasma Prof 254 HQC, art. 955, for High Definition cutting up to 60 mm) as well as a Plasma Prof 163 ACC, art. 957, for standard cutting up to 45 mm.



Stigal presents the PRO Master3D plasma cutting machine at TOOLEX and EUROTOOL

Two major international trade fairs took place in October in Poland. TOOLEX and EUROTOOL, held respectively in Sosnowiec and Kraków, attracting over 1000 exhibitors and thousands of visitors. Stigal, manufacturer of the fastest CNC cutting machines in Europe, presented two machines exclusively powered by the Cebora HQC Power Sources.

First of them is the updated model of the well recognized DYNAMIC Speed HQ - the fastest CNC plasma cutting machine with the Interchangable Operating Tables System, powered by a Cebora Plasma Prof 165 HQC.



Maserati approval for two Cebora power sources

The company Car Bench in Massa, manufacturer of benches for car repair, uses the Cebora welding and plasma cutting power sources for its training courses to the specialized body shops.

Car Bench has recently obtained the approval by the prestigious car manufacturer Maserati for two Cebora models of the Automotive line:

An excellent result of the cooperation between Car Bench andCebora as well as a further, important acknowledgement to the Cebora quality.



New Cebora partner in the UK

Cebora, already well known in the UK, where it's products have been marketed and appreciated for more than thirty yearshas recently reached a partnership agreement with Weldfast UK based in Newcastle-under-Lyme, Staffordshire, England. Weldfast UK is a company capable of managing the distribution of the Cebora range of power sources, accessories, genuine consumables and spare parts, as well as providing the necessary technical service, throughout the UK.

Weldfast UK boasts a long experience in the industrial welding and cutting field and has promptly put at the disposal of customers a website exclusively devoted to the different Cebora product lines.



Record-breaking Poznań ITM Fairs 2015: another big success for Stigal and Cebora

This year's edition of the ITM Fairs, held in Poznań, Poland, on June 9th through 12th, gathered nearly 1,000 exhibitors from 27 countries and 16,955 visitors. The Polish long-term partner of CEBORA, company STIGAL, manufacturer of the fastest and acclaimed plasma cutting machines in Europe, presented two of its flagship devices, both powered by CEBORA HQC power sources.

DYNAMIC Speed HQ, the fastest CNC plasma cutting machine in Europe, equipped with the interchangable operating tables system and light-gate safety system, amazed visitors by both the cutting speed and the quality of cut. Powered by a CEBORA Plasma Prof 165 HQC, it proved to be a best choice for all the customers looking for reliable, high-quality and high-speed, yet very compact machines.



The new three-phase 270A completes the Synstar line

After the success obtained by the first two models of the Synstar line, that is the 200A single phase power source (Synstar 200M, art. 322) and the 200A three-phase one (Synstar 200T, art. 323), Cebora is pleased to introduce the new 270A three-phase power source, Synstar 270T, art. 324, which completes the line.

In addition to the already known advantages of the Synstar line (versatility, easiness of use, wide LCD display for an even more user friendly control, large number of synergic programs supplied with the machine covering the most popular welding conditions, possibility to add the optional "pulsed arc" function), the new 270T model offers the following important features:




>>> Read all pieces of news


<< Top of page