INVERTER Power TIG 1965 DC HF POWER TIG 1665 DC-HF is a single-phase inverter power sources for TIG and MMA-SMAW use, not including AWS6010 cellulosic electrodes, designed for maintenance work and small production batches. The machine may work with pulsed arc, for use on thin workpieces where heat transfer must be minimal. The machine is set up for remote control using the foot control (art. 193), remote control (art. 187), or up-down command on the torch. The following gases may be used for protection: argon, argon/helium, hydrogen argon. In TIG mode, the arc is started either in high voltage/high frequency or by contact with the Cebora lift system. It is also possible to save up to 9 welding programs in memory.

	Art. 277		Technical specifications
	TIG	MMA
	230 V 50/60 Hz		Single phase input
	3.3 KW	4.2 KW	Max.installed powe
	5,5 KVA 35% 4,4 KVA 60% 3,7 KVA 100%	5,3 KVA 35% 4,9 KVA 60% 4,4 KVA 100%	Input power
	5 - 190 A	10 - 140 A	Current range
	190 A 35% 160 A 60% 140 A 100%	140 A 35% 125 A 60% 115 A 100%	Duty cicle  (10 min, per standard CEI26.13, EN60974.1 e IEC974.1)
	IP 23		Protection class
			Authorised for use in areas of increased hazard of electric shock
	11,5 Kg.		Weight
	176 x 370 x 400 h		Dimensions

Technical literature