SOUND MIG 2035/M Pulse

This is a single-phase inverter power source for MIG/MAG, SYNERGIC, and PULSED SYNERGIC welding, with Cebora wire feed unit featuring 2 aluminum rollers.
Designed for use in both the automotive industry (especially recommended for brazing and welding galvanized sheet metal, high-strength steel and aluminium) and in small-to-medium metal carpentry.
Two different types of torches may be used, Standard MIG and Push Pull, as well as two sizes of wire reels: Ø 200 (standard version with trolley Art. 1432) and Ø 300 (with coil kit Art. 129 and trolley Art. 1434).
The power source is supplied with a set of synergic curves stored in memory, representing the most common working conditions; the new synergic curves that will be developed in the future by Cebora, may be added to the memory directly by the dealer.
This is a simple PC upgrade procedure, and reqires no direct intervention by Cebora on the power source.
Art. 285

Technical specs.
230V
50/60 Hz		 Single phase input
5,5 KW Max installed power
7,4 KVA max Input power
15 - 200 A Current range
200A 35%
160 A 60%		 Duty cycle
(10 min. cycle, 40°C, according to EN60974.1)
Electronic Stepless regulation
0,6/0,8(1)Fe
0,6/0,8/1 Al
0,6/0,8/(1) Inox
0,8 CuSi 3%		 Wire sizes that can be used
Ø 200 mm/5 Kg Max wire spool size
IP 23 C Protection class
20 Kg. Weight
260 x 458 x 471 h Dimensions