POWER Plasma 3100 POWER PLASMA 3100 was developed to respond to the need to work with a power source that is easy to handle and to use, with minimum system requirements, but which still ensures excellent cutting quality on medium-small thicknesses POWER PLASMA 3100 weights just 13 Kg including the torch, and requires single-phase power supply; it works with compressed air or nitrogen (for high-quality cutting), provided at a pressure of 3.7 bar, with an air flow of just 60 l/s (and may thus be powered by a 25 l compressor). The recommended thickness for the best cutting quality is 6 mm, but the machine may go up to 10 mm with slightly inferior cutting quality; the separation thickness is 12 mm.

	Art. 296	Technical specifications
	115/230V 50/60 Hz	Single phase input
	3,2 KW 35%	Max installed power
	4,2 KVA 35%	Input power
	5 ÷ 25 A	Current range
	25 A 35%	Duty cicle (10 min.)
	Electronic	Stepless regulation
	6 ÷ 10 mm (12) 1/4" ÷ 3/8" (1/2")	Max thickness on steel
	4 mt. (13 ft.)	Cebora plasma torch
	60 lt/min 3.5 bar	Air consumption
	IP 23 C	Protection class
		Authorized for use in areas of increased hazard of electric shock
	13 Kg.	Weight
	150 x 357 x 382 h	Dimensions

Technical literature