ISO MIG 5002 Synergic
Also available with "SHIPYARD" wire feed unit (MIG / TIG / MMA)
  • Six-phase thyristor-driven electronic power source, sturdy and reliable in any conditions. Suitable for MIG/MAG welding of solid and flux-cored wires, both rutile and basic, with gaseous protection. Designed to carry out excellent, spatter-free welding even with arc voltages of less than 15 Volts and currents below 40 Amps.
  • One of the most sophisticated microprocessor-controlled digital control systems for welding parameters available today, which allows parameter setting and repeatability with a resolution precision to 1/10 Volt and 10 cm/min. of wire speed.
  • Management of the most specialized parameters and welding situations via the digital control panel, capable of handling pre-programmed synergic curves as well as specific programs set up by the user;
  • Special torches with potentiometer allow the welder to regulate the voltage and current of the synergic curve or, in the manual program, the wire speed during welding.





Art. 508
Technical specifications
230-400V
50/60 Hz		 Three phase input
21,6 KW 40%
19,0 KW 60%
14,2 KW 100%< /B>		 Max installed power
27,2 KVA 40%
24,2 KVA 60%
18,4 KVA 100%		 Input power
40-520 A Current range
500 A 40%
410 A 60%
320 A 100%		 Duty cycle
(10 min, 40°C)
Electronic Stepless regulation
Solid 0,8/1/1,2/1,6 Wire sizes that can be used
Ø 300 mm/15 Kg Max wire spool size
IP 21 Protection class
156 Kg. Weight of the power source


Technical literature