PLASMA PROF 122
  • Power source for plasma cutting, designed applying the technique of using the secondary inverter (CHOPPER) to control the power current. This ensures extreme constancy of performance under all cutting conditions, even output from the work-piece (ARC CONTROL)
  • Pilot arc starting with electronic High-Frequency
  • The machine can use either the original CEBORA P150 torch (standard equipment) or the P70 (upon request).
  • Automatic device to recognize the type of CEBORA torch mounted, automatically limiting the output power.
  • Both the torches and power source are fitted with the most complex safety devices available.
  • Manufacture and performance per standards EN 60974.1 - CEI 26.13.





Art. 946
Technical specifications
220-380/440V - 415/440 V
50/60 Hz		 Three phase input
19 KW Max.installed power
21 KVA 60%
16 KVA 100%		 Input power
20/70 A
20/120 A		 Current range
120 A at 60%
95 A at 100%		 Duty cicle 
(10 min, per standard CEI26.13, EN60974.1 e IEC974.1)
Electronic Stepless regulation
30 mm (1"1/4) Max thickness on steel
6 mt. (18 ft.) Cebora plasma torch supplied
220 lt/min 5 bar Air consumption
IP 21 Protection class
  		• Authorised for use in areas of increased hazard of electric shock
    120 Kg. Weight
    450 x 775 x 875 h Dimensions
  		• Thermostat controlled fan cooling




    Technical literature