PLASMA PROF 162
  • The PLASMA PROF 162 is a constant, direct current power source developed using "secondary-circuit Chopper" technology, with microprocessor-controlled cutting parameters and functions.
  • Automatic High Voltage/Frequency pilot arc striking reduces disturbances during start-up to a minimum.
  • The power source is capable of recognizing the type of torch connected, and automatically setting the appropriate safety devices. This takes place solely when ORIGINAL CEBORA TORCHES are used. The power source is unable to work with other torches.
  • The area provided at the back of the machine to house the torch cooling unit allows the creation of a compact system.
  • Using the optional interface Art.197, it is possible for the pantograph computer to remotely control:
    • Arc striking-
    • Arc transfer, with adjustable delay from 0 to 2 seconds.
    • Arc voltage, (max. 10 VDC).
    • Digital or isolated analog cutting current setting.





Art. 952
Technical specifications
220/230-380/440V - 415/440 V
50/60 Hz		 Three phase input
22 KW Max.installed power
27 KVA 40%
22 KVA 60%
16 KVA 100%		 Input power
20/90 A
20/160 A		 Current range
160 A at 40%
120 A at 60%
95 A at 100%		 Duty cicle 
(10 min, per standard CEI26.13, EN60974.1 e IEC974.1)
Electronic Stepless regulation
40 mm (1"2/3) Max thickness on steel
220 lt/min 5 bar max Air consumption
IP 21 Protection class
  		• Authorised for use in areas of increased hazard of electric shock
    144 Kg. Weight
    450 x 775 x 875 h Dimensions
  		• Suitable for use with water cooled torches


    Technical literature